کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
80408 | 49384 | 2009 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Formation of ultrafast-switching viologen-anchored TiO2 electrochromic device by introducing Sb-doped SnO2 nanoparticles Formation of ultrafast-switching viologen-anchored TiO2 electrochromic device by introducing Sb-doped SnO2 nanoparticles](/preview/png/80408.png)
Ultrafast-switching viologen-anchored TiO2 electrochromic device (ECD) was developed by introducing Sb-doped SnO2 (SbxSn1−xO2, ATO) as counter electrode (CE), and the switching behavior of the fabricated ECD was investigated as a function of Sb-doping concentration. About 9-nm-sized SbxSn1−xO2 (x=0–0.3) nanoparticles were synthesized by a solvothermal reaction of tin (IV) chloride and antimony (III) chloride at 240 °C, and employed to fabricate 2.4-μm-thick transparent CE. Working electrode (WE) was formed from the 7-nm-sized TiO2 nanoparticle by a doctor blade method, and the thickness of the nanoporous TiO2 electrode was 4.5 μm. The phosphonated viologen, bis(2-phosphonylethyl)-4,4′-bipyridinium dibromide, was then adsorbed on the prepared films for the construction of the ECD. The response time was strongly dependent on the doping concentration of Sb in ATO, and the fastest switching response was observed at 3 mol%. At this composition, the coloration time was 5.7 ms, and the bleaching time was 14.4 ms, which is regarded as one of the best results so far reported.
Journal: Solar Energy Materials and Solar Cells - Volume 93, Issue 12, December 2009, Pages 2108–2112