A highly selective electrochemical impedance spectroscopy-based aptasensor for sensitive detection of acetamiprid

A simple aptasensor for sensitive and selective detection of acetamiprid has been developed based on electrochemical impedance spectroscopy (EIS). To improve sensitivity of the aptasensor, gold nanoparticles (AuNPs) were electrodeposited on the bare gold electrode surface by cycle voltammetry (CV), which was employed as a platform for aptamer immobilization. With the addition of acetamiprid, the formation of acetamiprid–aptamer complex on the AuNPs-deposited electrode surface resulted in an increase of electron transfer resistance (Ret). The change of Ret strongly depends on acetamiprid concentration, which is applied for acetamiprid quantification. A wide linear range was obtained from 5 to 600 nM with a low detection limit of 1 nM. The control experiments performed by employing the pesticides that may coexist or have similar structure with acetamiprid demonstrate that the aptasensor has only specific recognition to acetamiprid, resulting in high selectivity of the aptasensor. The dissociation constant, Kd of 23.41 nM for acetamiprid–aptamer complex has been determined from the differential capacitance (Cd) by assuming a Langmuir isotherm, which indicates strong interaction between acetamiprid and aptamer, further proving high selectivity of the aptasensor. Besides, the applicability of the developed aptasensor has been successfully evaluated by determining acetamiprid in the real samples, wastewater and tomatoes.

► Electrochemical impedance aptasensor is developed first to detect acetamiprid.
► The aptasensor exhibits high sensitivity and selectivity for acetamiprid detection.
► The selectivity is confirmed by a low value of Kd for acetamiprid–aptamer complex.
► The aptasensor is successfully applied to determine acetamiprid in real samples.