کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
8852615 1618778 2018 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of operating parameters on arsenic transformation during municipal sewage sludge incineration with cotton stalk
ترجمه فارسی عنوان
تأثیر پارامترهای عملیاتی بر تبدیل آرسنیک در طی شستشوی لجن فاضلاب شهری با ساقه پنبه
کلمات کلیدی
لجن فاضلاب شهری، ساقه پنبه، دمای سوزاندن، گاز دودکش، تغییر شکل مخصوص آرسنیک،
موضوعات مرتبط
علوم زیستی و بیوفناوری علوم محیط زیست شیمی زیست محیطی
چکیده انگلیسی
Addition of cotton stalk (CS) has been proved to promote dramatically the transformation of toxic As3+ to less toxic As5+ in the fly ash during municipal sewage sludge (MSS) incineration. However, the fate of arsenic during co-firing of MSS and CS in different operating parameters was still unclear. In the present study, the effects of incineration temperatures and O2 content in the flue gas on speciation transformation of arsenic during MSS and 70% MSS/30% CS incineration were investigated in a bubbling fluidized bed. The results show that less arsenic is distributed in bottom ash whereas more arsenic is migrated to the fly ash and flue gas, with the temperature increasing from 800 °C to 950 °C. The arsenic capture in fly ash is facilitated predominantly by the condensation and/or physical adsorption of As2O3(g) at the temperatures from 800 °C to 900 °C. The chemical oxidation of As2O3(g) is favored by forming various arsenates (As5+) at 950 °C. At low O2 content from 1% to 5%, some arsenic compounds in MSS such as As2S3 can react with O2 to produce As2O3(g), and then more As2O3(g) is captured in the fly ash by the inherent mineral compounds like CaO through the condensation and/or physical adsorption. Further increasing O2 content especially to 9% stimulates significantly the oxidation of As3+ to As5+ in the fly ash, which is mainly attributed to the chemical reactions between As2O3(g), various mineral compounds and sufficient O2.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chemosphere - Volume 193, February 2018, Pages 951-957
نویسندگان
, , ,