Roles of physical and chemical properties of activated carbon in the adsorption of lead ions

Elucidation of the roles of chemical and physical properties of activated carbons is an important basis for the systematic development of adsorbents with optimal properties specific for certain applications. Such an understanding has challenged most researchers and this has been attributed with the difficulty in decoupling the effect of chemical and physical properties that characterize activated carbons. This study proposed empirical modeling in resolving the effects of individual carbon properties in lead adsorption. A model based on lead adsorption and carbon properties including total surface area, mean pore size and heteroatom concentrations has been shown to adequately describe the lead adsorption onto activated carbons prepared from bagasse. To support this investigation a series of activated carbons were prepared from bagasse by physical and by chemical activation techniques. The surface chemical properties of the carbons were inferred from carbon pH and heteroatom concentrations. The physical characterizations of the carbons included total surface area by the BET technique and mean pore size measured using the Horvath-Kawazoe equation. Adsorption tests were conducted using a low concentration of lead (5 ppm) and the solution pH was maintained at 1.0 to maintain lead speciation to the un-complexed Pb2+ ion. The adequacy of the proposed empirical models was statistically assessed. This form of analysis was shown to provide valuable information in tailor making adsorbents and selecting appropriate adsorbents for lead adsorption.