کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9633000 | 1425870 | 2005 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Oxidation of chalcopyrite by extended milling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Oxidation of chalcopyrite by extended milling Oxidation of chalcopyrite by extended milling](/preview/png/9633000.png)
چکیده انگلیسی
Chalcopyrite has been milled for up to 50 h in oxygen, air and argon atmospheres using a laboratory ball mill. No phase changes were evident in argon but the XRD peaks were weaker and broader indicating crystalline refinement. In oxygen, even after 1 h milling peaks for CuSO4·5H2O were present and these became predominant after 20 h milling where the chalcopyrite peaks were absent. In air, partial oxidation to CuSO4·5H2O was evident after 50 h. Leaching of the resultant powders with water showed 80% dissolution after 50 h milling in oxygen, significantly greater than the 20% and 6% dissolution after milling for 50 h in air and argon respectively. Solution analyses showed the Cu/Fe ratio increased with milling time in oxygen suggesting selectivity may be possible. The insoluble residue was found to consist of haematite, elemental sulphur and unreacted chalcopyrite.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Mineral Processing - Volume 77, Issue 4, 1 December 2005, Pages 208-216
Journal: International Journal of Mineral Processing - Volume 77, Issue 4, 1 December 2005, Pages 208-216
نویسندگان
C.J. Agnew, N.J. Welham,