Uranium recovery from industrial effluent by ion exchange-column experiments

The recovery of uranium from nuclear industrial effluent has been studied using laboratory column and polymeric ion exchange resin. The industrial effluent, at pH around 10, contains uranium (40 mg/L), ammonium (80 g/L) and carbonate (170 g/L) and cannot be discharged without previous treatment. Uranium is in the form of uranyl quadrivalent complex anions [UO2(CO3)3]4−. The resin IRA 910 U was employed for its specific application for uranium extraction. Adsorption was carried out at flow rate of 1.0, 2.0, and 5.0 mL/min, which corresponds to a retention time of 10, 5.0 and 2.5 min, respectively. The use of ion the exchange technique makes the recovery of more than 98% of the uranium possible. Elution was carried out with ammonium carbonate solutions and also with the diluted effluent. The eluate contained uranium ranging from 2.4 to 2.7 g/L. The solution eluate might be recycled back into the process with the advantage of saving this valuable metal.