Devolatilisation characteristics of coal and biomass blends

The characterisation of the initial devolatilisation products could provide important information for understanding synergistic effects and subsequently the formation routes leading to toxic organic compounds and soot during co-combustion. Initial devolatilisation characteristics of the fuels have been characterised following co-pyrolysis experiments. This paper investigates the devolatilisation behaviour during co-pyrolysis of pinewood together with one of three coals of different rank, lignite or high-volatile bituminous of different origin. A range of pyrolysis experiments has been performed over a temperature range from 400 to 900 °C using pyrolysis-GC-MS (py-GC-MS) and thermogravimetric analysis (TGA). Larger scale batch pyrolysis experiments of the hv bituminous coal-pine mixture have been performed enabling collection of the evolved tars. These tars have then been characterised by GC-MS and size exclusion chromatography (SEC). For these batch pyrolysis tests, synergy (non-additive behaviour) was observed and the blend pyrolysis oil contained a decrease in aromatics and an increase in phenols than would be expected for additive behaviour. The molecular weight distributions of the evolved tars also show non-additive behaviour. For the TGA experiments, additive behaviour was seen for all the coal-pine blends studied. Similarly, no obvious synergy was observed by py-GC-MS for the bituminous coal-pine blends, or for model compound-coal and coal-biomass component blends. Non-additive combustion behaviour is not easily explained by studying devolatilisation because of the difficulty in replicating the conditions of temperature profile and residence time experienced by the volatiles. Thus, conflicting behaviour is exhibited depending upon pyrolysis technique.