Retention profile, kinetics and sequential determination of selenium(IV) and (VI) employing 4,4′-dichlorodithizone immobilized-polyurethane foams

Polyurethane foams (PUFs) loaded with the chromogenic reagent 4,4′-dichlorodithizone (Cl2H2DZ) have been investigated for the quantitative retention, chemical speciation and sequential determination of traces of inorganic selenium(IV) and (VI) from aqueous media containing bromide ions. The retention profile of selenium(IV) onto the reagent loaded foam followed a dual-mode sorption mechanism involving both absorption related to “solvent extraction” and an added component for surface adsorption. The kinetics and thermodynamic characteristics of selenium(IV) uptake onto PUFs have been studied. The kinetics of selenium(IV) sorption onto PUFs was found fast, reached equilibrium in few minutes and followed a first-order rate constant in presence of bromide ions in the extraction media. The thermodynamic parameters, ΔH, ΔS and ΔG, indicated the exothermic and spontaneous nature of the sorption process. The sorption and the recovery percentages of inorganic selenium(IV) from fresh water by the proposed loaded foam columns were achieved quantitatively. The height equivalent to theoretical plate (HETP), the number of layers (N), breakthrough capacity and the critical capacity for selenium(IV) uptake onto Cl2H2DZ loaded foams columns were found to be 1.3, 103, 8.6 and 7.2 mg/g, respectively. The method was successfully applied for the chemical speciation and sequential determination of inorganic selenium(IV) and/or (VI) species spiked to fresh and industrial wastewaters.