Air assimilative capacity-based environment friendly siting of new industries—A case study of Kochi region, India

Air pollution has become a matter of grave concern, particularly in mega-cities and urban areas, where the situation is alarming and becoming more and more severe day-by-day and warrants, therefore, careful planning to facilitate future industrial development. Site selection, with the objective of minimizing adverse environmental impacts based on environmental criteria is a vital prerequisite, particularly for air polluting industries. In order to locate any air polluting industry, the assimilative capacity of the region needs to be assessed carefully and planned accordingly, so that the receiving environment is not adversely affected. Assimilative capacity of a region/airshed, widely represented through the ventilation coefficient by many researchers in the past, does not give a clear picture about the amount of emission load that can be assimilated in a given region. The ventilation coefficient, at best, can only present a broad picture about the air pollution dispersion potential (low, medium or high) of the region.A modified approach, which utilizes air quality modelling as a tool to estimate the maximum allowable emission load that a region can assimilate without violating the stipulated standards, has been used for estimating the assimilative capacity of the air environment. Details of this approach have been presented in this paper through a case study carried out for the Kochi region, located in the Kerala State of India. A variety of emission and meteorological scenarios have been considered and critical emission loads have been estimated. This approach shall provide necessary technical guidance to the environmental regulatory authorities as well as to the industries in planning environment friendly industrial development.