کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10620731 | 988655 | 2010 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A method for measuring single-crystal elastic moduli using high-energy X-ray diffraction and a crystal-based finite element model
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: A method for measuring single-crystal elastic moduli using high-energy X-ray diffraction and a crystal-based finite element model A method for measuring single-crystal elastic moduli using high-energy X-ray diffraction and a crystal-based finite element model](/preview/png/10620731.png)
چکیده انگلیسی
This paper presents a method - based on high-energy synchrotron X-ray diffraction data and a crystal-based finite element simulation formulation - for understanding grain scale deformation behavior within a polycrystalline aggregate. We illustrate this method by using it to determine the single-crystal elastic moduli of β21s, a body-centered cubic titanium alloy. We employed a polycrystalline sample. Using in situ loading and high-energy X-rays at the Advanced Photon Source beamline 1-ID-C, we measured components of the lattice strain tensor from four individual grains embedded within a polycrystalline specimen. We implemented an optimization routine that minimized the difference between the experiment and simulation lattice strains. Sensitivity coefficients needed in the optimization routine are generated numerically using the finite element model. The elastic moduli that we computed for the β21s are C11 = 110 GPa, C12 = 74 GPa and C44 = 89 GPa. The resulting Zener anisotropic ratio is A = 5.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 58, Issue 17, October 2010, Pages 5806-5819
Journal: Acta Materialia - Volume 58, Issue 17, October 2010, Pages 5806-5819
نویسندگان
C. Efstathiou, D.E. Boyce, J.-S. Park, U. Lienert, P.R. Dawson, M.P. Miller,