کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10620901 | 988741 | 2006 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Plastic deformation and fracture of ultrafine-grained Al-Mg alloys with a bimodal grain size distribution
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Four different ultrafine-grained (ufg) Al-7.5 wt.% Mg alloys were synthesized by consolidation of a mixture of as-received and cryomilled Al-Mg powders with a ratio of 1:9, yielding a bimodal microstructure consisting of coarse grains (grain sizes, dcg, typically of several micrometers) evenly distributed in the ufg matrices (average grain sizes d = 120, 142, 197, and 338 nm). The deformation behavior under uniaxial compression and tension of the as-extruded alloys was investigated. The Ramberg-Osgood equation was used to fit the compressive stress-strain curves of the bimodal ufg alloys. The compressive yield stresses of the ufg matrices with different average grain sizes indicated a reduced slope in the Hall-Petch relation. The plastic deformation of the ufg Al-Mg alloys with a bimodal microstructure was highly localized. The fracture of the alloys was attributed to shear localization under the compressive tests, and to a combination of shear localization, cavitation, and necking under the tensile tests.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 54, Issue 7, April 2006, Pages 1759-1766
Journal: Acta Materialia - Volume 54, Issue 7, April 2006, Pages 1759-1766
نویسندگان
G.J. Fan, H. Choo, P.K. Liaw, E.J. Lavernia,