Selective detection and recovery of gold at tannin-immobilized non-conducting electrode

• Selective detection of gold at non-conducting (NC) polymer modified electrode.
• Mimosa tannin oxidized on glassy carbon electrode surface as NC polymeric film.
• Permselective diffusion and mediated electron transfer at NC electrode surface.
• Chemical recovery of gold is due to the reducing ability of the NC polymeric film.
• Adsorption capacity of Au(III) on carbon fiber was 29 ± 1.45 mg g−1 at 60 °C.

A tannin-immobilized glassy carbon electrode (TIGC) was prepared via electrochemical oxidation of the naturally occurring polyphenolic mimosa tannin, which generated a non-conducting polymeric film (NCPF) on the electrode surface. The fouling of the electrode surface by the electropolymerized film was evaluated by monitoring the electrode response of ferricyanide ions as a redox marker. The NCPF was permselective to HAuCl4, and the electrochemical reduction of HAuCl4 to metallic gold at the TIGC electrode was evaluated by recording the reduction current during cyclic voltammetry measurement. In the mixed electrolyte containing HAuCl4 along with FeCl3 and/or CuCl2, the NCPF remained selective toward the electrochemical reduction of HAuCl4 into the metallic state. The chemical reduction of HAuCl4 into metallic gold was also observed when the NCPF was inserted into an acidic gold solution overnight. The adsorption capacity of Au(III) on tannin-immobilized carbon fiber was 29 ± 1.45 mg g−1 at 60 °C. In the presence of excess Cu(II) and Fe(III), tannin-immobilized NCPF proved to be an excellent candidate for the selective detection and recovery of gold through both electrochemical and chemical processes.

Figure optionsDownload as PowerPoint slide