Optimization of the separation and on-line sample concentration of phenethylamine designer drugs with capillary electrophoresis-fluorescence detection

Five 2C-series of phenethylamine designer drugs, including 2,5-dimethoxy-4-ethylthio-phenethylamine (2C-T-2), 2,5-dimethoxy-4-(n)-propylthiophenethylamine (2C-T-7), 4-chloro-2,5-dimethoxyphenethylamine (2C-C), 4-bromo-2,5-dimethoxy-phenethylamine (2C-B), 2,5-dimethoxy-4-iodo-phenethylamine (2C-I), were synthesized and standard GC/MS and fluorescence spectra are reported for them. A mixture of the five drugs was separated and detected by means of capillary electrophoresis (CE) with native fluorescence and light emitting diode (LED)-induced fluorescence (LIF) detection, respectively, for comparison. In the former case, exciting at a wavelength of 300 nm from a Xe lamp was used. The detection limits were found to be only in the range of ∼10−4 M by the micellar electrokinetic chromatography (MEKC) mode but were improved to ∼10−7 M when the sweeping-MEKC mode was used. For a highly sensitive analysis, LED-induced fluorescence detection was examined by derivatizing the compounds with a fluorescent dye, fluorescein isothiocyanate isomer I (FITC). A blue-LED (∼2 mW) was used as the fluorescence excitation source. The detection limits were improved to ∼10−7 and ∼10−8 M, respectively, when the MEKC and stacking-MEKC modes were applied. A mimic urine sample was obtained by spiking urine from a volunteer with the five standards, and after liquid-liquid extraction, the sample was examined by means of the MEKC-LIF mode. The extraction procedures used for the urine sample and the CE conditions for the separation were optimized.