Application of atmospheric pressure dielectric barrier discharge plasma for the determination of Se, Sb and Sn with atomic absorption spectrometry

The atomization of hydride-forming elements, Se, Sb and Sn, has been studied with an atmospheric pressure dielectric barrier discharge atomizer. The elements were first converted to hydride through the reaction with NaBH4. Then the hydride were atomized in the atomizer and detected by atomic absorption spectrometry. The effects of operational parameters such as power, gas flow rate and concentrations of HCl and NaBH4 were investigated. Compared with other hydride atomization methods, the proposed atomizer shows the following features: (1) small size, which is preferable for the miniaturization of the total analytical system; (2) low temperature, which would be helpful for further improvement in the compactness of the total analytical system; (3) low power consumption, which is also necessary for the development of analytical instrumentation for in situ detection of environmentally important elements. The analytical performance of the atomizer has also been investigated. The detection limits of Sb, Se and Sn obtained with the present method were 13.0, 0.6 and 10.6 μg l− 1. This detector is a very promising technique for hydride detection.