کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1281288 | 1497499 | 2014 | 8 صفحه PDF | دانلود رایگان |
• ZnO nanorods were prepared by hydrothermal method.
• H2 sensing of the nanorods was investigated depending on various parameters.
• The higher sensor response was observed for Pd coated sample compared to un-coated.
• The as-prepared sample showed better sensor response due to surface charge number.
In this study, the hydrogen (H2) sensing properties of vertically aligned zinc oxide (ZnO) nanorods were investigated depending on annealing, Pd coating, temperature and electrode structure. ZnO nanorods were fabricated by using hydrothermal method on a glass substrate and an indium tin oxide (ITO) coated glass substrate. In order to determine the effects of annealing on the H2 sensor performance, the nanorods were heated at 500 °C in dry air. H2 sensing measurements were done in the temperature range of 25–200 °C. It was found that, the sensor response of Pd coated ZnO nanorods were much higher than the un-coated nanorods due to the catalytic effect of Pd thin film. Moreover, the un-annealed samples showed better sensor response than the annealed samples due to the number of oxygen deficiency. In addition, the lateral electrode structure showed higher sensor response than the sandwich electrode structure.
Journal: International Journal of Hydrogen Energy - Volume 39, Issue 10, 26 March 2014, Pages 5194–5201