کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1282673 1497593 2010 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Photoelectrochemical and physical properties of WO3 films obtained by the polymeric precursor method
موضوعات مرتبط
مهندسی و علوم پایه شیمی الکتروشیمی
پیش نمایش صفحه اول مقاله
Photoelectrochemical and physical properties of WO3 films obtained by the polymeric precursor method
چکیده انگلیسی

Tungsten trioxide (WO3) films were prepared by a solution-based method using ammonium metatungstate as the precursor and polyethylene glycol as the structure-directing agent. With the measurements of thermogravimetric and differential thermal analysis, X-ray diffraction, scanning electron microscopy, and ultraviolet and visible absorption spectroscopy, the effect of substrates and temperature on the crystal structure and crystalline formation of WO3 was investigated. The results show that the WO3 films were crystallized by sintering at over 400 °C, and the films prepared on fluorine–tin oxide glass substrates were distorted cubic in crystalline phase. However, a monoclinic crystal was formed by coating films on graphite and quartz glass substrates. Photoelectrochemical activity was evaluated under visible light irradiation. The WO3 electrode calcined at 450 °C exhibited a photocurrent density of up to 2.7 mA/cm2 at 1.4 V (vs. RHE) under incident 100 mW/cm2 500 W Xe lamp and donor carrier density ND = 2.44 × 1022 cm−3 in 0.5 M H2SO4 electrolyte. The photoanode was stable up to 90 min, and the photocurrent decreased 39% with continuous gas evolution.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Hydrogen Energy - Volume 35, Issue 24, December 2010, Pages 13137–13145
نویسندگان
, , , , ,