کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1285162 | 973124 | 2009 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Titanium oxynitride films for a bipolar plate of polymer electrolyte membrane fuel cell prepared by inductively coupled plasma assisted reactive sputtering Titanium oxynitride films for a bipolar plate of polymer electrolyte membrane fuel cell prepared by inductively coupled plasma assisted reactive sputtering](/preview/png/1285162.png)
Titanium oxynitride (TiNxOy) films are investigated for application as a bipolar plate coating material in a polymer electrolyte membrane fuel cell (PEMFC). TiNxOy films with various amounts of oxygen are deposited on stainless-steel substrates by inductively coupled plasma (ICP) assisted reactive sputtering by changing the oxygen gas flow rate. The interfacial contact resistance (ICR) and the corrosion resistance of the TiNxOy films are measured under PEMFC simulated conditions. When the amount of oxygen in the TiNxOy film is approximately <12 at.% (O2 flow rate ≤0.2 sccm), the corrosion resistance is enhanced considerably, whereas the interfacial contact resistance does not change. The corrosion current density decreases from 8 × 10−6 A cm−2 for the TiN-coated sample to 2.7 × 10−6 A cm−2 at 0.6 V vs. SCE as a result of oxygen incorporation in the TiN film. The ICR value remains at 2.5 mΩ cm2 at 150 N cm−2. When a small amount of oxygen is added to the TiN film, it is postulated that the oxygen atoms locate at the column and grain boundaries, and thus prevent corrosive media from penetrating into the substrate while not deteriorating the electrical property of the film.
Journal: Journal of Power Sources - Volume 193, Issue 2, 5 September 2009, Pages 570–574