کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1401880 | 1501385 | 2014 | 6 صفحه PDF | دانلود رایگان |

• We used biocompatible methyl MQ silicone resin to toughen PLLA at low loadings.
• The prepared blend showed breaking elongation of 217.7% without sacrificing strength.
• The prepared blend showed light transmittance the same as neat PLLA.
Poly(l-lactide) (PLLA)/Methyl MQ (M: mono-functional silicon–oxygen unit R3SiO1/2, abbreviated as M; Q: tetra-functional silicon–oxygen unit SiO2, abbreviated as Q) Silicone Resin (Me-MQ) blends were prepared via a simple solvent evaporation method at various Me-MQ loadings. PLLA is high in strength and modulus, but its applications are limited partly due to its inherent brittleness. It is difficult to keep both toughness and transparency for modified PLLA without compromising its tensile strength and biocompatibility. In this study, we used biocompatible Me-MQ to toughen PLLA at low loadings. The elongation at break of neat PLLA is 7.8%. Tensile test showed that the elongation at break of PLLA blends increased to 67.9% and 217.7% at the loadings of 1 and 2 wt% Me-MQ respectively, with no sacrifice of their strength. UV–vis test showed the light transmittance of the films at the loadings of 1 wt% Me-MQ is almost the same as neat PLLA.
Figure optionsDownload as PowerPoint slide
Journal: European Polymer Journal - Volume 50, January 2014, Pages 243–248