Quantitative analysis of TEGDMA and HEMA eluted into saliva from two dental composites by use of GC/MS and tailor-made internal standards

ObjectivesThe use of resin-based dental restorative materials is rapidly increasing, concurrently the biocompatibility of the materials is under investigation. Attention has been placed on studies addressing the cytotoxic, genotoxic and estrogenic potential of these materials. Therefore, the degree of exposure to eluted compounds from the dental materials is of high interest. The aim of this study was to assess the amounts of 2-hydroxyethyl methacrylate (HEMA) and triethyleneglycol dimethacrylate (TEGDMA), released from two composites, eluting into human saliva. To improve the method of quantification, three tailor-made internal standards were synthesized.MethodsSpecimens made from two composites (Tetric EvoCeram and Filtek Z250) were polymerized and immersed in human saliva for 24 h. Eluted TEGDMA and HEMA were identified and quantified. The quantitative analyses were performed by use of combined gas chromatography–mass spectrometry (GC/MS) with tailor-made internal standards synthesized by dissolving HEMA or TEGDMA in methanol and reducing the double bond of the methacrylate group by hydrogenation with 1H2 and 2H2 (D2) gas.ResultsHEMA was released from both materials, whereas TEGDMA eluted from Filtek Z250 only. Full scan GC–MS analysis of each tailor-made internal standard demonstrated one peak only, which was well separated from the corresponding analyte's peak and with no traces of HEMA or TEGDMA.SignificanceThe quantification method seems well suited for in vivo analysis, and the three standards synthesized represent an improved tool for quantification of the eluted monomers. The synthesis may be applied to other methacrylate monomers to produce tailor-made standards for quantification.