Cyclic deformation behavior of a Ti–26 at.% Nb alloy

The effect of cyclic deformation on superelasticity was investigated in a Ti–26 at.% Nb alloy. Loading and unloading tensile tests with a constant maximum applied strain of 2.5% were carried out until the 500th cycle. The critical stress for inducing the martensitic transformation and superelastic strain decreased, while the accumulated residual strain increased with increasing number of cycles. The increase in the residual strain during cyclic deformation was due mainly to α′′ martensite phase stabilization. Both the residual strain and the residual α′′ martensite phase increased with increasing number of cycles. The stability of superelasticity was improved, i.e. the residual strain decreased and the superelastic strain increased, by intermediate-temperature annealing and/or aging. The specimen annealed at 873 K for 0.6 ks followed by aging at 573 K for 3.6 ks exhibited the most stabilized superelasticity, owing to the combination effect of work hardening and fine ω-phase precipitation.