کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1448418 | 988673 | 2010 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Brazing copper to alumina using reactive CuAgTi alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The purpose of this work was to describe and discuss the fundamental issues involved in reactive brazing of alumina to copper by CuAgTi alloys. The method used to bring the Ti to the CuAg braze enabled the Ti concentration in the braze to be varied to a large extent (from 0.8 to 6 wt.%). It was then possible to study the effects of this parameter on the interfacial chemistry and joint microstructure, as well as on the mechanical performance of the brazing joints, characterized by tensile tests. The mechanical strength of metal/alumina joints processed by reactive brazing was also compared with data obtained using a standard metallization process.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 58, Issue 4, February 2010, Pages 1252–1260
Journal: Acta Materialia - Volume 58, Issue 4, February 2010, Pages 1252–1260
نویسندگان
O. Kozlova, M. Braccini, R. Voytovych, N. Eustathopoulos, P. Martinetti, M.-F. Devismes,