Cryogenic applications of commercial electronic components

We have developed a range of techniques useful for constructing analog and digital circuits for operation in a liquid Helium environment (4.2 K), using commercially available low power components. The challenges encountered in designing cryogenic electronics include finding components that can function usefully in the cold and possess low enough power dissipation so as not to heat the systems they are designed to measure. From design, test, and integration perspectives it is useful for components to operate similarly at room and cryogenic temperatures; however this is not a necessity. Some of the circuits presented here have been used successfully in the MUSTANG [1] and in the GISMO [2] camera to build a complete digital to analog multiplexer (which will be referred to as the Cryogenic Address Driver board). Many of the circuit elements described are of a more general nature rather than specific to the Cryogenic Address Driver board, and were studied as a part of a more comprehensive approach to addressing a larger set of cryogenic electronic needs.

► We have assembled a group of electronic design procedures for circuit operation in liquid Helium.
► This paper covers readily available semiconductors and passive components.
► Emphasis is placed on reducing power consumption through radio frequency design techniques.
► We suggest fabrication supplies, test fixtures and test procedures.
► Examples of analog and digital circuits are shown, as well as a completed design.