کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1582255 | 1514874 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
〈c〉-Component plastic displacements in different microstructures of TiAl-base intermetallics
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Three different microstructures of a near-gamma Ti–48Al–2Cr–2Nb–B (at.%) alloy, nearly lamellar (NL), equiaxed with a low alpha2 phase volume fraction (ELA), and equiaxed with the high alpha2 phase volume fraction (EHA) were investigated. The three microstructural types exhibited different creep behaviour at 973 K and 350 MPa. Interrupted creep tests were performed to assess the evolution of dislocation densities and deformation twinning with increasing creep strain. Results of the quantitative analysis suggest that deformation twinning represents a relevant contribution to the strain accumulation kinetics at high temperatures and makes NL and EHA microstructures less creep resistant but more ductile.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volumes 483–484, 15 June 2008, Pages 109–112
Journal: Materials Science and Engineering: A - Volumes 483–484, 15 June 2008, Pages 109–112
نویسندگان
A. Orlová, K. Kuchařová, A. Dlouhý,