کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1618948 | 1005714 | 2010 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hydrogen absorption in as-cast bcc single-phase Ti–Al–Nb alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this article, hydrogen absorption properties of bcc single-phased as-cast Ti–Al–Nb alloys near pseudo-binary section at about 50 at.% of Ti are considered. Possible reasons of enhancing hydrogen capacity with the increasing of Nb content from ∼34 to ∼42 at.% and decreasing Al content from ∼13 to ∼6 at.% are discussed. The alloys and corresponding hydrides have been characterized by X-ray diffraction. Ti–6 at.% Al–42 at.% Nb is found to absorb maximum hydrogen H/M = 1.88 (∼2.81 wt.%) to form a hydride at 500 °C temperature and 1.2 MPa. Beneficial effect of mild cold rolling deformation on hydrogen capacity is noted. All the studied compositions demonstrate good kinetics and absorb hydrogen quickly, within 20–30 min after activation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 505, Issue 1, 27 August 2010, Pages 183–187
Journal: Journal of Alloys and Compounds - Volume 505, Issue 1, 27 August 2010, Pages 183–187
نویسندگان
A.M. Patselov, V.V. Rybin, B.A. Greenberg, N.V. Mushnikov,