Promoting pellet growth of Trichoderma reesei Rut C30 by surfactants for easy separation and enhanced cellulase production

It is desirable to modify the normally filamentous Trichoderma reesei Rut C-30 to a pellet form, for easy biomass separation from the fermentation medium containing soluble products (e.g., cellulase). It was found in this study that this morphological modification could be successfully achieved by addition of the biosurfactant rhamnolipid (at ≥0.3 g/L) and the synthetic Triton X-100 (at ≥0.1 g/L) to the fermentation broth before the cells started to grow actively. Thirteen other surfactants tested were not as effective. Furthermore, the added rhamnolipid and Triton X-100 increased the maximum cellulase activity (Filter Paper Units) produced in the fungal fermentation; the increase was 68 ± 7.8% for rhamnolipid and 73 ± 12% for Triton X-100. At the concentrations required for pellet formation, rhamnolipid had negative effect on the cell growth: with increasing rhamnolipid concentrations, the growth rate decreased and the lag-phase duration increased linearly. Triton X-100 caused no significant differences in growth rate or lag phase.

► Pellet growth in Trichoderma reesei Rut C-30 induced by rhamnolipid or Triton X-100.
► Triton X-100 and rhamnolipid increased cellulase activity.
► Rhamnolipid had negative effect on the cell growth.
► Triton X-100 indicated no significant differences in cell growth.