کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1754758 1522808 2015 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A calculation method of optimal water injection pressures in natural fractured reservoirs
ترجمه فارسی عنوان
روش محاسبه فشار مطلوب تزریق آب در مخزن شکسته طبیعی
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات زمین شناسی اقتصادی
چکیده انگلیسی


• Stress state in a fractured reservoir has been analyzed.
• Three-collinear fracture model has been established.
• The Mode II fracture model has been expressed in a new form.
• A new calculation method of water injection pressure has been proposed.
• The prediction results by using the new method agree with in-situ measurement results.

Injection pressures usually play a great role in the stimulation of low permeability fractured reservoirs. In this study, the stress state around an injection well was analyzed, and a three-collinear fracture model was established. Based on this model, the mode II fracture criterion was expressed in terms of a new form without stress intensity factor and fracture toughness involved. Based on this new form of fracture criterion, a calculation method of water injection pressures was proposed, and its effectiveness has been confirmed by the measurement results from Fuyu reservoir of Toutai oilfield. The factors that affecting optimal injection pressures have been investigated, and the results show that the water injection pressure is largely affected by the state of natural factures and the in-situ stress; According to Fuyu reservoir geological property and natural fracture distribution, the water injection pressure has been predicted and the result agrees well with that adopted in Fuyu reservoir. This study will have a beneficial application in the design and optimization of hydraulic fracturing in naturally fractured reservoirs.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Petroleum Science and Engineering - Volume 133, September 2015, Pages 705–712
نویسندگان
, , , ,