Preparation of carbon-coated MgFe2O4 with excellent cycling and rate performance

MgFe2O4 (MFO) was prepared by a simple coprecipitation method followed by subsequently calcining at 600 °C, and carbon-coated MFO (MFO/C) was obtained at 550 °C using pyrrole as carbon source. The MFO/C used as anode material for rechargeable lithium-ion battery delivers a reversible capacity of 744.0 mAh g−1 after 160 cycles at a current density of 100 mA g−1, while the carbon-coated Fe3O4 (FO/C) prepared under the same condition exhibits a gradually declined capacity to 476.7 mAh g−1 after cycling 95 times. The reversible capacities of MFO/C at the rates of 200, 400, 800, 1600, 3200, 6400 mA g−1 are 612.7, 570.5, 529.5, 466.6, 355.6, and 216.9 mAh g−1, also much higher than those of FO/C measured at the corresponding rates. The excellent electrochemical performance of MFO/C is associated with the smaller grain size of MFO, the nitrogen-doped carbon coating, the formation of MgO as a dispersant during charging/discharging to prevent Fe and its oxides from agglomeration and to buffer large volume change.

Carbon-coated MgFe2O4 exhibits outstanding long-term cycling performance, excellent rate capabilities even charging/discharging at a high rate of 6400 mA g−1.Figure optionsDownload as PowerPoint slideHighlights
► Carbon coated MgFe2O4 (MFO/C) was prepared at 550 °C using pyrrole as carbon source.
► The MFO/C exhibits a capacity of 744.0 mAh g−1 after 160 cycles at 100 mA g−1.
► The MFO/C demonstrates a capacity of 216.9 mAh g−1 at a rate of 6400 mA g−1.
► The MFO/C delivers a capacity of 335.7 mAh g−1 during long-term cycling at 800 mA g−1.