Inhibition of nickel coated mild steel corrosion by electrosynthesized polyaniline coatings

Polyaniline (PANI) coatings were electrochemically synthesized on nickel (Ni) coated mild steel (MS) and their corrosion protection properties were investigated. In this work, the Ni layer (∼1 μm thick) was electrodeposited on MS under galvanostatic condition. Thereafter, the PANI coating was deposited over the Ni layer from aqueous salicylate medium by using cyclic voltammetry. These bi-layered composite coatings were characterized by cyclic voltammetry, UV–vis absorption spectroscopy and Fourier transform infrared (FTIR) spectroscopy. The corrosion protection properties of Ni coated MS (Ni/MS) and PANI coated Ni/MS (PANI/Ni/MS) were investigated in aqueous 3% NaCl by using open circuit potential (OCP) measurements, potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). It was shown that the top layer of PANI exhibits a lower porosity behavior with respect to Ni coating and reduces the corrosion rate of Ni/MS almost by a factor of 3500 and increases the lifetime of Ni coating.