کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
190488 | 459700 | 2010 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Electrodeposition and characterisation of Sn–Ag–Cu solder alloys for flip-chip interconnection Electrodeposition and characterisation of Sn–Ag–Cu solder alloys for flip-chip interconnection](/preview/png/190488.png)
A pyrophosphate and iodide based bath was investigated for the electrodeposition of near-eutectic Sn–Ag–Cu alloys, which are promising lead-free solder candidates for electronics interconnection. Near-eutectic Sn–Ag–Cu electrodeposits (2.5–4.2 wt.% Ag and 0.7–1.5 wt.% Cu) were achieved from the system as measured by wavelength dispersive X-ray spectroscopy (WDS). Electroplating such near-eutectic ternary alloys at higher deposition rates was possible with the application of electrolyte agitation. Different morphologies of deposited Sn–Ag–Cu films were analysed using scanning electron microscopy (SEM). X-ray diffraction (XRD) data indicated that Sn, Ag3Sn and Cu6Sn5 were present in the “as-electrodeposited” Sn–Ag–Cu film. The microstructure of the deposits and the morphology of Ag3Sn and Cu6Sn5 intermetallics were characterised from cross-sectional images produced from a focused ion beam scanning electron microscopy and then imaged from transmission electron microscopy (TEM) micrographs. The proposed bath proved capable of producing fine pitch near-eutectic Sn–Ag–Cu solder bumps as demonstrated on a glass test wafer.
Journal: Electrochimica Acta - Volume 56, Issue 1, 15 December 2010, Pages 183–192