کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
194220 | 459786 | 2007 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Electrochemical generation of hydrogen peroxide using surface area-enhanced Ti-mesh electrodes
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Ti-mesh electrodes coated with Ti were obtained by using an electrophoretic deposition (EPD) method. The Ti coating was porous and showed a good adherence to the Ti-mesh surface, due to sintering of Ti particles during thermal treatment at 900 °C. The Ti-coated mesh electrode has a BET surface area of 3.5 m2/g, about four times larger than that of the bare electrode. The surface area-enhanced Ti-mesh electrode was applied in electrical generation of hydrogen peroxide. It was shown that the rate of hydrogen peroxide generation increased drastically compared to the fresh electrode, since the larger electrode surface area enhanced not only current density, but also the oxygen mass transfer rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Electrochimica Acta - Volume 52, Issue 22, 30 June 2007, Pages 6304–6309
Journal: Electrochimica Acta - Volume 52, Issue 22, 30 June 2007, Pages 6304–6309
نویسندگان
Kyung Shik Yang, Guido Mul, Jacob A. Moulijn,