کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
195007 | 459804 | 2006 | 7 صفحه PDF | دانلود رایگان |
A new methodology that combines the sol–gel method and a template approach is used to synthesize porous LiNi1−xCoxO2 films. Conventional films are obtained through the sol–gel method. The films are used to evaluate the influence of this new methodology on the electrochemical performance. It was observed, from X-ray diffraction analysis on the conventional film that a further increase in the annealing temperature to 450 °C leads to a more ordered system indicated by the presence of characteristics LiNi1−xCoxO2 diffraction patterns. Above this temperature no significant modification in the X-ray patterns is observed in the porous film. We concluded, using other experimental techniques including cyclic voltammetry, electrochemical impedance and charge/discharge tests) that electrochemical properties, such as, oxidation and reduction charges and charge/discharge capacity of LiNi1−xCoxO2 are significantly improved in the porous film, which demonstrates the feasibility of the proposed methodology.
Journal: Electrochimica Acta - Volume 51, Issue 28, 15 September 2006, Pages 6419–6425