کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
212228 | 462037 | 2014 | 8 صفحه PDF | دانلود رایگان |
• A process for zinc recovery from spent pickling liquor is developed
• Sequential solvent extraction using TBP and D2EHPA is used to recover zinc sulphate
• The product meets the specification of low chloride concentration for electrowinning
• A mathematical model was used to simulate and further develop the process
A process for zinc sulphate recovery from the spent pickling liquor of a hot-dip galvanizing plant is developed. Two solvent extraction steps are used, the first with tributyl phosphate to selectively extract zinc chloride from the spent liquor and the second with di-2-ethylhexyl phosphoric acid (D2EHPA) to transfer zinc from a chloride to sulphate media. The final product of the process is found to meet the specification of low chloride concentration required for electrowinning when the loaded D2EHPA was washed with water. Mathematical simulation was used to further develop the process. Based on a feed concentration of 120 g/L Zn, 60 g/L Fe(II) and 1 mol/L HCl, the simulation predicts that 99.2% zinc can be recovered, yielding a product with 106 g/L Zn.
Journal: Hydrometallurgy - Volume 142, February 2014, Pages 108–115