کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
212938 462073 2009 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The effect of surface area on the modelling of quartz dissolution under conditions relevant to the Bayer process
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
The effect of surface area on the modelling of quartz dissolution under conditions relevant to the Bayer process
چکیده انگلیسی

The dissolution kinetics of natural quartz powders in strong caustic-carbonate solutions and synthetic Bayer liquor was investigated using a gas-fired digestion apparatus at 250 °C for up to 20 min. In caustic-carbonate solutions, a large number of etch pits formed with reaction time and contributed to the dramatic increase in B.E.T specific surface area. The surface roughness (ratio of B.E.T. area to geometric surface area) increased from ~ 280 to over 2000. In synthetic liquor, fewer etch pits formed because of the coating effect of sodalite formed on the surface. The dissolution rate in both caustic-carbonate solutions and liquor is proportional to the geometric surface area and not the B.E.T. area. The geometric area normalised rate in liquor is about one-fourth the rate in the caustic-carbonate solutions due to the coating of sodalite. The dissolution process in both cases, including the dissolution of fine quartz (< 3 μm) in liquor, is better described by a shrinking sphere model than the phenomenological model used previously in the literature.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Hydrometallurgy - Volume 98, Issues 1–2, August 2009, Pages 108–115
نویسندگان
, , ,