Leaching behavior of metals from a limonitic nickel laterite using a sulfation–roasting–leaching process

The leaching behavior of metals from a limonitic laterite was investigated using a sulfation–roasting–leaching process for the recovery of nickel and cobalt. The ore was mixed with water and concentrated sulfuric acid followed by roasting and finally leaching with water. Various parameters were studied including the amount of acid added, roasting temperature and time, sample particle size, addition of Na2SO4 and solid/liquid ratio in leaching process. More than 88% Ni, 93% Co and < 4% Fe are extracted under the determined conditions. Simultaneously, about 90% Mn and Cu, 70% Mg, 45% Al, 25% Zn, 4% Cr and Ca are extracted respectively. The pH of the leach solution is about 2. The leaching efficiency is independent of sample particle size due to decomposition of ferric sulfate formed during roasting. The roasted mass was characterized by various physico-chemical techniques such as DSC/TGA, XRD and SEM. This process provides a simple and effective way for the extraction of nickel and cobalt from laterite ore.