The physicochemical parameters during dry heating strongly influence the gelling properties of whey proteins

In this study we determined the composition (proportion of native proteins, soluble and insoluble aggregates) and quantified the gelling properties (gel strength and water holding capacity) of pre-texturized whey proteins by dry heating under controlled physicochemical conditions. For this purpose, a commercial whey protein isolate was dry heated at 80 °C (up to 6 days), 100 °C (up to 24 h) and 120 °C (up to 3 h) under controlled pH (2.5, 4.5 or 6.5) and water activity (0.23, 0.32, or 0.52). Gelling properties were quantified on heat-set gels prepared from reconstituted pre-texturized proteins at 10% and pH 7.0. The formation of dry-heat soluble aggregates enhanced the gelling properties of whey proteins. The maximal gelling properties was achieved earlier by increasing pH and water activity of powders subjected to dry heating. An optimized combination of the dry heating parameters will help to achieve better gelling properties for dry heated whey proteins.

► Dry heating improves the gelling properties of whey proteins.
► Composition and gelling properties are sensitive to dry heating conditions.
► Maximal gel strength requires 30–40% of soluble aggregates in dry heat powders.
► Formation of insoluble aggregates are detrimental to gelling properties.