کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
2614 | 118 | 2009 | 8 صفحه PDF | دانلود رایگان |
Amorphous calcium phosphate powders were precipitated from calcium metal and phosphoric acid in ethanol. Depending on the quantity of reagent, the CaP powders had different chemical compositions and, after heating, formed beta-tricalcium phosphate (β-TCP), hydroxyapatite (HA) or BCP mixtures. Dilatometric measurements indicated that shrinkage of compacted CaP powders occurred first at around 650 °C and continued up to 1200 °C. The amorphous CaP powders were mixed with urea beads, compacted under isostatic pressure at 140 MPa and sintered at 1100 °C for 5 h. Scanning electron microscopy indicated that macro–microporous ceramics were produced. The ceramics had spherical macropores of 700–1200 μm in diameter, with limited interconnections and a macroporosity of 42% as determined by microcomputed tomography. The micropores ranged from 0.1 to 1 μm in diameter. These ceramics made of HA, β-TCP or BCP exhibiting both macroporosity and microporosity can be used as bone fillers.
Journal: Acta Biomaterialia - Volume 5, Issue 2, February 2009, Pages 735–742