کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
3172361 1199936 2014 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Evaluación de la interfase adhesiva obtenida en restauraciones de resina compuesta realizadas con un sistema adhesivo universal utilizado con y sin grabado ácido previo
ترجمه فارسی عنوان
بررسی رابط چسبندگی در ترمیم های رزین کامپوزیتی ساخته شده با یک سیستم چسب جهانی که با اچینگ و بدون اچ انجام می شود.
کلمات کلیدی
موضوعات مرتبط
علوم پزشکی و سلامت پزشکی و دندانپزشکی دندانپزشکی، جراحی دهان و پزشکی
چکیده انگلیسی

ResumenObjetivoEl propósito de esta investigación fue realizar un estudio observacional in vitro, al microscopio electrónico de barrido, de la interfase adhesiva diente-restauración lograda al utilizar un sistema adhesivo universal (Single Bond Universal®, 3M/ESPE, Alemania), con grabado ácido previo y con la técnica de autograbado.Material y métodoEn las piezas dentarias se realizaron cavidades clase V en las caras vestibular y palatina/lingual. En la cavidad vestibular se realizó la técnica de grabado ácido con H3PO4 al 37% en gel, mientras que en la cavidad palatina o lingual no se realizó grabado ácido. Las piezas restauradas fueron mantenidas en una estufa a 37 °C con 100% de humedad relativa durante 48 h, simulando el medio bucal. Las muestras obtenidas fueron cortadas a través de la restauración y acondicionadas para poder ser observadas al microscopio electrónico de barrido, para evaluar la interfase adhesiva en relación con la presencia de brechas y la formación de tags de resina.ResultadosLas imágenes fueron observadas con un aumento progresivo hasta los 2.000×, viéndose diferencias microestructurales en la penetración del adhesivo, aunque sin formación de brechas en la interfase adhesiva.ConclusionesSe observó que, al utilizar ambas técnicas de aplicación se obtiene una interfase sin presencia de brechas. En esmalte, se generó una menor penetración del adhesivo en la estructura cristalina con la técnica de autograbado, mientras que en dentina, con la misma técnica, se genera una capa híbrida de menor espesor y tags de resina de menor longitud.

ObjectiveThe purpose of this research was to study the tooth-restoration adhesive interface, using a universal adhesive system (Single Bond Universal, 3M/ESPE, Germany), with the techniques of etching and self-etching using scanning electron microscopy.Material and methodsClass V cavities were prepared in buccal and palatine/lingual surface, in human teeth. Etching with 37%H3PO4 was performed in the buccal cavity, with no etching being performed in the palatine or lingual cavity. The samples were placed in an oven at 37 °C and 100% humidity for 48 hours, simulating the oral environment. The samples were cut perpendicularly through the restoration and prepared to be observed by scanning electron microscopy, in order to evaluate the adhesive interface in relation to the presence of breaches and the formation of resin tags.ResultsImages were observed with a gradual increase to 2000×. Microstructural differences were observed in the penetration of the adhesive but with no formation of breaches in the adhesive interface.ConclusionsAn unbreached interface is obtained when using both techniques. In enamel, less penetration was present in the crystal structure of the adhesive with the self-etching technique. While in dentin, with the same technique, a less thick hybrid layer and shorter resin tags were observed.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Revista Clínica de Periodoncia, Implantología y Rehabilitación Oral - Volume 7, Issue 3, December 2014, Pages 115–122
نویسندگان
, ,