Accuracy of low-dose computed tomography (CT) for detecting and characterizing the most common CT-patterns of pulmonary disease

PurposeTo assess the ability of low-dose CT to detect and characterize the most common CT patterns of pulmonary disease.Methods and materialsSixty patients with nodules, consolidations or interstitial disease were scanned using a low-dose (128 mm × 0.6 mm, 40 reference mAs, 120 kVp) and standard-dose CT protocol (150 reference mAs, 120 kVp). Two radiologists with 3 and 10 years of thoracic imaging experience searched both exams in consensus for the most commonly observed CT patterns according to the Fleischner Society criteria, which consisted of 46 different subgroups of ground-glass opacities, nodules, interstitial and airspace diseases. The standard of reference was established by consensus of a panel of two experienced chest radiologists (9 and 12 years of experience).ResultsThe lung segments (1080) showed 813 nodules, 596 ground-glass opacities, 74 airspace and 575 interstitial diseases and 64 normal segments. In particular, air-space disease and nodules were unaffected by the increase in noise. However, the sensitivity to detect ground-glass opacities, ground-glass nodules and interstitial opacities decreased significantly, from 89% to 77%, 86% to 68% and 91% to 71%, respectively (all p-values < 0.00001). Using iterative reconstruction instead of the applied filtered back projection sensitivity for ground-glass nodules rose to the sensitivity of standard-dose CT in an additional phantom study.ConclusionA low-dose CT of 40 mAs/120 kVp is feasible for detecting solid nodules, airspace, airways and pleural disease. For diagnosing pathologies consisting of ground-glass opacities or interstitial opacities, higher tube current or iterative reconstruction is required.