Repeated use of MAP decomposition residues for the removal of high ammonium concentration from landfill leachate

The residues of magnesium ammonium phosphate (MAP) decomposed by heating under alkali conditions were repeatedly used as the sources of phosphate and magnesium for the removal of high ammonium concentration from landfill leachate. Up to 96% of ammonium in MAP powder could be released under the following conditions: NH4+:OH− molar ratio, 1:1; temperature, 90 °C; heating time, 2 h. Fourier transform infrared spectra and X-ray diffraction analysis of MAP before and after heating demonstrated that MAP was mainly transformed to amorphous magnesium sodium phosphate (MgNaPO4), which makes it possible for the NH4+ to replace Na+ in MgNaPO4 to form more stable struvite. Successful ammonium removal was achieved by using the MAP decomposition residues as the sole phosphate and magnesium sources. The ammonium removal decreased gradually following the increase of MAP reuse cycles, and in the 6th cycle, ammonium removals of 84% and 62% were achieved for synthetic wastewater and landfill leachate, respectively. Analysis of the surfaces of MAP powders acquired at different reuse cycles using scanning electron microscopy with energy dispersive X-ray suggested that the existence of calcium, kalium and aluminum ions in landfill leachate might have inhibited the formation of MAP through competition with ammonium ions for phosphate ions. It is estimated that reuse of MAP for 3 cycles could save about 44% chemical costs.