Optimization of an integrated electrodisinfection/electrocoagulation process with Al bipolar electrodes for urban wastewater reclamation

In this work, a novel integrated electrochemical process for urban wastewater regeneration is described. The electrochemical cell consists in a Boron Doped Diamond (BDD) or a Dimensionally Stable Anode (DSA) as anode, a Stainless Steel (SS) as cathode and a perforated aluminum plate, which behaves as bipolar electrode, between anode and cathode. Thus, in this cell, it is possible to carry out, at the same time, two different electrochemical processes: electrodisinfection (ED) and electrocoagulation (EC). The treatment of urban wastewater with different anodes and different operating conditions is studied. First of all, in order to check the process performance, experiments with synthetic wastewaters were carried out, showing that it is possible to achieve a 100% of turbidity removal by the electrodissolution of the bipolar electrode. Next, the effect of the current density and the anode material are studied during the ED–EC process of actual effluents. Results show that it is possible to remove Escherichia coli and turbidity simultaneously of an actual effluent from a WasteWater Treatment Facility (WWTF). The use of BDD anodes allows to remove the E. coli completely at an applied electric charge of 0.0077 A h dm−3 when working with a current density of 6.65 A m−2. On the other hand, with DSA anodes, the current density necessary to achieve the total removal of E. coli is higher (11.12 A m−2) than that required with BDD anodes. Finally, the influence of cell flow path and flow rate have been studied. Results show that the performance of the process strongly depends on the characteristics of the initial effluent (E. coli concentration and Cl−/NH4+ initial ratio) and that a cell configuration cathode (inlet)–anode (outlet) and a higher flow rate enhance the removal of the turbidity from the treated effluent.

Figure optionsDownload high-quality image (243 K)Download as PowerPoint slideHighlights
► A novel integrated electrochemical process for urban wastewater reuse is proposed.
► Simultaneous removal of Escherichia coli and turbidity is performed.
► Hypochlorite and chloramines are the main responsible of the disinfection process.
► The role of flow path and flow rate on the process efficiency is evaluated.