کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4482139 1316848 2013 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
ADM1 calibration using BMP tests for modeling the effect of autohydrolysis pretreatment on the performance of continuous sludge digesters
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات فرآیندهای سطح زمین
پیش نمایش صفحه اول مقاله
ADM1 calibration using BMP tests for modeling the effect of autohydrolysis pretreatment on the performance of continuous sludge digesters
چکیده انگلیسی


• A novel sludge pretreatment technique was assessed using a modeling approach.
• The feasibility of using BMP tests to calibrate the ADM1 was evaluated.
• Changes in hydrolytic limiting steps were well represented by the model.
• Good model performance was attained and pretreatment effects correctly predicted.
• Combining BMP tests with the ADM1 proved to be a powerful tool in this study.

Improving anaerobic digestion of sewage sludge through pretreatment techniques is a suitable solution for better sludge management. In this sense, modeling may present itself as an important tool to assess and predict process performance and pretreatment effects. In this study, the feasibility of using biochemical methane potential (BMP) tests data for calibrating the Anaerobic Digestion Model No. 1 (ADM1) was evaluated, in order to simulate the operation of continuous digesters fed, at different HRTs, with raw and autohydrolysis-pretreated waste activated sludge. This was achieved using a simplified COD fractioning methodology proposed to define ADM1 inputs. Hydrolysis constant rates were determined as the most sensitive parameters, and estimated using BMP tests. The calibrated model was then cross-validated with continuous digesters data sets. Good model performance was attained employing these techniques. The ADM1 was able to successfully represent the consumption of slowly biodegradable organic matter in BMP tests, the changes in hydrolytic limiting steps due to the autohydrolysis pretreatment and the behavior of the continuous digesters in overall. The COD fractioning methodology and the Xc variable manipulation proposed seemed to be crucial for proper model predictions. Results indicate that BMP tests are a suitable data source for ADM1 calibration, and that the model can be a powerful tool to assess the effect of the autohydrolysis pretreatment on the anaerobic digestion of sewage waste activated sludge.

Figure optionsDownload high-quality image (148 K)Download as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Water Research - Volume 47, Issue 9, 1 June 2013, Pages 3244–3254
نویسندگان
, , , , ,