Use of nanoparticular and soluble anionic celluloses in coagulation-flocculation treatment of kaolin suspension

In this work, the effectiveness of a novel, combined coagulation-flocculation treatment based on alum and soluble or nanoparticular anionic derivatives of dialdehyde cellulose, ADAC, was evaluated by studying the removal of colloidal material in a model suspension containing kaolin. Four different ADACs with varying degrees of substitution, size and water solubility were synthesized by periodate oxidation and sulfonation of cellulose. The effects of ADAC dosage, solution pH and temperature on flocculation were studied by measuring residual turbidity of the settled suspension. Moreover, the charge densities, sizes, ζ-potentials and stability of the ADACs in aqueous solutions were studied. The combined treatment was effective in the removal of colloidal particles, as demonstrated by reduced residual turbidity with remarkably lower total chemical consumption compared with coagulation with alum alone. Of the ADACs, samples with lower solubility that contained cellulose nanoparticles performed better than the fully water-soluble sample. Due to the restricted pH tolerance of alum, the combined treatment was effective only at acidic conditions (pH < 5), although the ADACs were found to be stable in a much broader pH range (pH of 3 to about 9). ADACs also retained strong activity at higher temperatures (30–60 °C) and after several days of storage in aqueous solution.

Figure optionsDownload high-quality image (139 K)Download as PowerPoint slideHighlights
► Nanoparticular cellulose flocculants were used with alum to treat kaolin suspension.
► Combined treatment proved to be effective in removal of colloidal particles.
► Lower chemical consumption than with coagulation with alum alone was achieved.
► Partly soluble samples possessed a better performance than water-soluble samples.