Factors affecting bulk to total bacteria ratio in drinking water distribution systems

Bacteria in drinking water systems can grow in bulk water and as biofilms attached to pipe walls, both causing regrowth problems in the distribution system. While studies have focused on evaluating the factors influencing the bacteria in bulk water and in biofilms separately, there is a need for understanding biofilm characteristics relative to the bulk water phase. The current study evaluated the effects of chlorine and residence time on the presence of culturable bacteria in biofilms relative to that in bulk water. The results showed that when no chlorine residual was present in the system, the median ratio of bulk to total bacteria was 0.81, indicating that 81% of the bacteria were present in bulk water, whereas only 19% were present in the biofilm. As chlorine concentration increased to 0.2, 0.5, and 0.7 mg/L, the median percentage of bacteria present in bulk water decreased to 37, 28, and 31, respectively. On the other hand, as the residence times increased to 8.2, 12, 24, and 48 h, the median percentage of bacteria present in bulk water increased to 7, 37, 58, and 88, respectively, in the presence of a 0.2 mg/L chlorine residual. The common notion that biofilms dominate the distribution system is not true under all conditions. These findings suggest that bulk water bacteria may dominate in portions of a distribution system that have a low chlorine residual.