Mechanism of aerobic biological destabilisation of wool scour effluent emulsions

Wool scouring effluent is a highly polluted industrial wastewater in which the main pollutant, wool wax, is held in a stable oil-in-water emulsion by non-ionic detergent. The use of microbial action to cause emulsion destabilisation has been proposed as a new treatment strategy for this effluent stream. This strategy aims at improving aerobic treatment performance by physically removing the high-COD, slowly bio-degradable wool wax from the system without bio-degradation. The mechanism by which an aerobic-mixed culture destabilises the wool scouring effluent emulsion was investigated. Our results show that destabilisation is due to partial bio-degradation of both the scouring detergent and the wool wax. Cleavage of the wool wax esters was the first stage in wax degradation, when 40–50% of wax was de-emulsified. Over the same period, detergent degradation was low, at 7–21%. With further incubation, detergent degradation increased, aiding further breakdown of the emulsion. The degradation of the detergent, a nonylphenol ethoxylate, resulted in both a reduction in molar concentration (of up to 82%) and a shortening of the ethoxylate chain length. The latter reduced the hydrophile–lipophile balance (HLB) from 12 to approximately 7, thereby reducing the ability of the residual detergent to stabilise the emulsion. Analysis of the emulsified and de-emulsified wax fractions could not identify a group of compounds that were preferentially de-emulsified based on molecular weight or polarity. These findings will assist in using a de-emulsification strategy in both existing and new treatment systems in order to save on aeration costs and treatment times for biological treatment of this highly polluted wastewater.