Coupling of sequencing batch reactor and mesh filtration: Operational parameters and wastewater treatment performance

Wastewater treatment performance of the combined process of sequencing batch reactor (SBR) and mesh filtration bio-reactor was investigated with a synthetic wastewater. In this system, the filtration was performed only by the water level difference between the reactor and the effluent port, with the help of a sludge layer which accumulated on the mesh filter.A half volume of the mixed liquor was filtrated for ca. 1 h, and the filtration time was not affected by the initial pressure within the range of 0.5–2.0 m-H2O. Since the mesh filter could effectively reject the biomasses in the reactor, the effluents contained SS of less than 1 mg/L and BOD of less than 10 mg/L under continuous or intermittent aeration conditions. Nitrogen was also removed effectively with the adjustment of aeration time under the intermittent aeration conditions.The results obtained in this work indicate that mesh filtration could be effectively combined with SBR and improve the performance of SBR.In addition, it was shown that the performance of the mesh filtration such as filtration time and solids separation was influenced significantly by the saccharide content in the exocellular polymer of the activated sludge.