Adsorbent obtained from CEPT sludge in wastewater chemically enhanced treatment

Chemically enhanced primary treatment (CEPT) in municipal wastewater treatment is particularly suitable for rapidly growing cities. The focus on CEPT process now might be the cost of chemicals and disposal of chemical sludge. In this study, the potential application of adsorbent made from CEPT sludge in CEPT wastewater treatment was investigated in various conditions, such as the adsorbent dosage, pH, and dosing modes of ferric chloride and adsorbent. It was found that sludge-derived adsorbent was a good way of sludge disposal while enhanced pollutants removal rate and reduced the fresh ferric chloride dosage. With the use of 10.0 mg L−1 of ferric chloride and 0.6 g L−1 of the adsorbent at the first stage simultaneously, the enhanced removal efficiencies of turbidity, UV254, COD, TP were 83.3%, 52.3%, 48.8% and 89.0%, respectively. The experiments showed that ferric chloride dose was reduced about 50%. The pH played a significant role in coagulation and adsorption process.