Groundwater inflow to a shallow, poorly-mixed wetland estimated from a mass balance of radon

SummaryRadon activity within a shallow wetland in southern Australia has been measured on three occasions between May and October 2006. Measured activities within the surface water display a similar pattern of spatial variability on each occasion, suggesting that it is related to the locations of groundwater inflow and mixing processes. The mean groundwater inflow rate has been estimated from the mean radon activity using a mass balance approach. The components of the radon budget are (i) contribution from groundwater inflow, (ii) diffusive flux from wetland bottom sediments (iii) loss due to gas exchange, (iv) loss due to radioactive decay, (v) loss due to groundwater or surface water outflow. Also required to complete the water balance are the surface water inflow rate, direct precipitation on the wetland, and evaporation rate. The radon diffusive flux has been estimated from measurements of radon production within the sediments and a diffusive transport model, calibrated by measurements of radon activity in sealed chambers that can receive radon only from diffusion and lose it only by radioactive decay. Radon loss due to gas exchange is inferred from the loss rate of SF6, following its injection into isolated areas of the wetland, while the rate of radioactive decay is known. The radon activity in groundwater inflow is measured from sampling piezometers surrounding the wetland. Steady state and transient mass balance approaches yield similar results, with groundwater inflow rates varying between 12 and 18 m3/day. Estimated groundwater inflow rates are most sensitive to the radon activity of groundwater inflow, the gas exchange velocity, surface water area and the accuracy with which the mean radon activity in the wetland can be measured. Importantly, it is relatively insensitive to the surface water inflow rate, which is poorly known.