Regulation of the catalytic behavior of pullulanases chelated onto nickel (II)-modified magnetic nanoparticles

Chelating of pullulanases onto nickel (II)-modified magnetic nanoparticles results in one-step purification and immobilization of pullulanase, and facilitates the commercial application of pullulanase in industrial scale. To improve the catalytic behavior, especially the operational stability, of the nanocatalyst in consecutive batch reactions, we prepared various iminodiacetic acid-modified magnetic nanoparticles differed in surface polarity and spacer length, on which the His6-tagged pullulanases were chelated via nickel ions, and then studied the correlation between the MNPs surface property and the corresponding catalyst behavior. When pullulanases were chelated onto the surface-modified MNPs, the thermostability of all pullulanase derivatives were lower than that of free counterpart, being not relevant to the protein orientation guided by the locality of the His6-tag, but related to the MNPs basal surface polarity and the grafted spacer length. After chelating of pullulanases onto MNPs, there were changes observed in the pH-activity profile and the apparent Michaelis constant toward pullulan. The changing tendencies were mainly dependent on the His6-tagged pullulanase orientation, and the changing extents were tuned by the spacer length. The reusability of pullulanase immobilized by N-terminal His6-tag was higher than that of pullulanase immobilized by C-terminal His6-tag. Moreover, the reusability of the immobilized pullulanase tested increased till grafting polyether amine-400 as spacer-arm, therefore the N-terminal His6-tagged pullulanase chelating MNPs grafted polyether amine-400 gave the best reusability, which retained 60% of initial activity after 18 consecutive cycles with a total reaction time of 9 h. Additionally, the correlation analysis of the catalyst behaviors indicated that the reusability was independent from other catalytic properties such as thermostability and substrate affinity. All the results revealed that the catalyst behavior can be mainly controlled by the His6-tagged pullulanase orientation than by the MNPs surface property which can tune the catalyst function.