کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4907231 | 1426200 | 2017 | 44 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Experimental densities of 2,2,2-trifluoroethanol with 1-butyl-3-methylimidazolium hexafluorophosphate at high pressures and modelling with PC-SAFT
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Experimental densities of 2,2,2-trifluoroethanol with 1-butyl-3-methylimidazolium hexafluorophosphate at high pressures and modelling with PC-SAFT Experimental densities of 2,2,2-trifluoroethanol with 1-butyl-3-methylimidazolium hexafluorophosphate at high pressures and modelling with PC-SAFT](/preview/png/4907231.png)
چکیده انگلیسی
New data of densities at temperatures in the 288.15-333.15 K range and several pressures, up to 40 MPa, have been measured for 2,2,2-trifluoroethanol + 1-butyl-3-methylimidazolium hexafluorophosphate system using a vibrating tube densimeter. The combined expanded uncertainty at the 0.95 confidence level in the density measurements is 2 kg·mâ3. Excess molar volumes, VmE, and apparent molar volumes, VÏ, were determined from the density values of the pure compounds and mixtures. The influence of the temperature, pressure and composition on VmE, VÏ, was studied. In general, the dependence of VmE with the mole fraction is sigmoid showing that there is a competition between the breaking and formation of interactions and the packing effect; VÏ was represented using the Redlich-Mayer equation, indicating that hydrogen bonding interactions are inexistent or scarce. Derived properties, κT and αp were calculated from the analytical differentiation of the Tait equation, and it was observed that the variation with pressure and temperature is very small for 1-butyl-3-methylimidazolium hexafluorophosphate. In addition, PC-SAFT parameters of 1-butyl-3-methylimidazolium hexafluorophosphate were optimized using density data at atmospheric pressure. From PC-SAFT, pVT behaviour was reasonably well predicted with an average relative deviation of 3.1%, whereas sigmoid behaviour of excess molar volumes is not represented by the model.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: The Journal of Chemical Thermodynamics - Volume 113, October 2017, Pages 29-40
Journal: The Journal of Chemical Thermodynamics - Volume 113, October 2017, Pages 29-40
نویسندگان
Moisés R. Currás, Marta M. Mato, Pablo B. Sánchez, Josefa GarcÃa,