کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4980819 1453331 2017 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A hybrid approach for estimating fugitive emission rates in process development and design under incomplete knowledge
ترجمه فارسی عنوان
یک روش ترکیبی برای برآورد میزان انتشار فتوحات در توسعه و طراحی فرایند تحت دانش ناقص است
کلمات کلیدی
ترجمه چکیده
انتشار گازهای گازی یکی از قابل توجه ترین مشارکت کنندگان در انتشار اتمسفر در صنایع فرآوری شیمیایی است که نه تنها بر اقتصاد، بلکه همچنین محیط زیست و سلامت کارگران تاثیر می گذارد. برای کاهش انتشار گازهای آزاد شده در این فرایند، ارزیابی انتشار گازهای گازی باید در مراحل اولیه طراحی فرآیند شیمیایی انجام شود، در حالی که هزینه تغییرات در آن کمترین است. با این وجود، دانش محدودی در مورد منابع نشتی وجود دارد، زیرا این روند هنوز در حال طراحی است. این مقاله رویکرد ترکیبی برای تخمین نرخ انتشار فتوحات در اوایل مرحله طراحی ارائه می دهد. این روش ترکیبی از یک پایگاه داده انتشار پیشآزمون از روش استاندارد بر مبنای فرآیند استاندارد با ارزیابی با استفاده از الگوریتم ژنراتور و نمودارهای ابزار دقیق است اگر یک ماژول مناسب در پایگاه داده موجود نباشد. همچنین، هیدروژن کار و تنفس در ارزیابی قرار دارد. ارزیابی انتشار گازهای گلخانه ای از یک مطالعه موردی تقطیر و سیستم های ذخیره سازی هیدرو دی آلکالیزاسیون برای نشان دادن رویکرد پیشنهادی ارائه شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی بهداشت و امنیت شیمی
چکیده انگلیسی
Fugitive emissions are one of the most notable contributors to atmospheric releases in chemical process industries affecting not only the economy but also both the environment and workers' health. In order to reduce fugitive emissions released in this process, the assessment of fugitive emissions should be conducted at the early stage of chemical process design when the cost of making changes is the lowest. This is however impeded by the limited knowledge on the leak sources, since the process is still under design. The paper presents a hybrid approach for estimating fugitive emission rates early in the design phase. The method combines a pre-calculated emission database of standard process module based approach with estimation by using generic piping and instrumentation diagrams if a suitable module is not available from the database. Also, both working and breathing emissions are included in the assessment. The emissions' assessment from a case study of hydrodealkylation distillation and storage systems is presented to demonstrate the proposed approach.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Process Safety and Environmental Protection - Volume 109, July 2017, Pages 365-373
نویسندگان
, , ,